The Seekonk SK series preset torque wrench is designed for fool proof versatility in a convenient configuration. As with our other slip type tools, over torquing is impossible even with continued turning. The unmatched performance and endurance exhibited by these tools are made possible by internal components produced on state of the art CNC machining centers.
The Seekonk SK Cam-Over Torque Wrench are pre-set at the factory to your requirements. Under normal use, yearly calibration is sufficient, however; routine calibration checks on a torque analyzer would be considered prudent. Standard accuracy +/- 4%.
NOTE: MR-1 & 2 also available in direct drive, Lock-up mode, or as torques left, ratchet right configuration on special order. MR-3 direct drive
- Made in the USA
- Includes calibration certificate
|LT-M||2-20 lb-in||1/4 In||4 1/2 In||1 3/8 In||6 oz|
|LT-0||5-60 lb-in||3/8 In||6 1/8 In||1 5/8 In||13 oz|
|LT-L||5-60 lb-in||3/8 In||6 1/8 In||1 5/8 In||13 oz|
|LT-R||30-100 lb-in||1/4 or 3/8 In||7 In||3 1/4 In||4 oz|
|MR-1||3-15 lb-ft||3/8 or 1/2 In||9 5/8 In||2 3/8 In||35 oz|
|MR-2||15-30 lb-ft||3/8 or 1/2 In||9 5/8 In||2 3/8 In||35 oz|
|MR-3||30-90 lb-ft||1/2 In||17 In||2 1/2 In||55 oz|